How Much do they cost? Always the first question we get asked. The answer depends upon the quantity and size of the tattoos. Four popular sizes are 40 x 40mm, 40 x 50mm, 40 x 60mm, and 50 x 50 mm Is your design square or rectangular? It doesn't matter how many colours. BETTER STILL, UPLOAD AND SEND AN IMAGE. In the comments box include preferred size and quantity.FAQ Price discounts at 1K 2K 3K 6K 10K 25K 50K 100K etc Where are you located? You will find our names, business address and phone numbers on the contact page. Would you deal with someone that has no name address or phone, think about it. What is your lead time? Why is your lead time approx 2 weeks and other businesses can supply in days? These businesses that supply in days are using the DIY Paper and printing using a domestic printer on this paper. The difference is in the quality of the tattoo produced. They are unable to print white and unable to place adhesive only on the image, so when the tattoo is applied to the skin, a large square of clear adhesive can be seen around the tattoo. They are also very shiny. Our tattoos are printed using a completetly different method. Minimum Quantity? CUSTOM DESIGNS:- Minimum is 1000 of any size if we print tattoos using your design. Are they safe? Inks are nontoxic and approved safe by the FDA. Ingredients are printed on the reverse to comply with Australian regulations and approved under AS/NZS ISO 8124.3:2003 Safety of Toys. Certificate held our office. Artwork format? Artwork is to be emailed to us in a graphic format such as Corel, Illustrator, Photoshop, eps, cmx or a jpg file of at least 300dpi. The image print area on each card is 3mm smaller than the card size all around.

Card 40 x 40mm Artwork Area 34x34mm Card 40x50mm Artwork Area 34x44mm Card 40x60mm Artwork Area 34x54mm Card 50x50mm Artwork Area 44x44mm Larger sizes available on request Freight Charges? We normally use express post for ease of tracking for custom design tattoos. Lead time? CUSTOM DESIGNED:-Allow 2 weeks from date of order and acceptance of artwork for custom designed tattoos. How to apply? Instructions are printed on the reverse of each tattoo. Remove the plastic film and place face down on skin. Dampen back of tattoo with a sponge or wet cloth for approx. 30 seconds. Then gently remove the backing paper. Pat dry carefully. How to remove tattoo? Tattoos are water resistant but may be removed by rubbing with baby oil or using sticky tape. How long do they last? Somewhere between 3 to 6 days, depending upon how much wear and tear the tattoo receives. Every person is different.

FAQ